Ideal-Zanussi IZGS980ITX Manual de usuario descargar pdf (Pagina 5)

DAILY USE

Warning! Refer to the Safety chapters.

Ignition of the burner

Warning! Be very careful when you use open fire

in kitchen environment. Manufacturer decline any

responsibility in case misuse of the flame

Always light the burner before you put cookware.

To light the burner:

1. Turn the control knob counterclockwise to the

maximum position (

) and push it down.

2. Keep the control knob pushed for approximately 5

seconds; this will let thermocouple to warm up. If

not, the gas supply will be interrupted.

3. Adjust the flame after it is regular.

If after some tries the burner does not light, check

if the crown and its cap are in correct positions.

A) Burner cap

B) Burner crown

C) Ignition candle

D) Thermocouple

Warning! Do not keep the control knob pushed

for more than 15 seconds.

If the burner does not light after 15 seconds, re-

lease the control knob, turn it into off position and

try to light the burner again after minimum 1 mi-

nute.

Important! In the absence of electricity you can ignite

the burner without electrical device; in this case

approach the burner with a flame, push the relevant

knob down and turn it counter-clockwise to maximum

gas release position.

If the burner accidentally goes out, turn the control

knob to the off position and try to light the burner

again after minimum 1 minute.

The spark generator can start automatically when

you switch on the mains, after installation or a

power cut. It is normal.

Turning the burner off

To put the flame out, turn the knob to the symbol .

Warning! Always turn the flame down or switch

it off before you remove the pans from the burner.

HELPFUL HINTS AND TIPS

Warning! Refer to the Safety chapters.

Energy savings

• If possible, always put the lids on the pans.

1 2 3 4 5 6 7 8 9 10 11 12

Comentarios a estos manuales

Sin comentarios

Ideal-Zanussi IZGS980ITX Manual de usuario Pagina 5

Comentarios a estos manuales